MIL-P-46183
20 June l984
MILITARY SPECIFICATION
PLASTIC MOLDING and EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK)
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers polyetheretherketone (PEEK) thermo- plastic materials suitable for injection molding or extrusion (See 6.1).
1.2 Classification. The PEEK thermoplastic materials shall be of the following types and classes (see 6.2):
Type I - Nonreinforced plastic
Type II - Glass fiber reinforced plastic (GFRP)
Class |
1 |
10 |
+ 2% |
GFRP |
(by |
wt) |
Class |
2 |
20 |
+ 2% |
GFRP |
(by |
wt) |
Class |
3 |
30 |
+ 2% |
GFRP |
(by |
wt) |
Type III - Carbon fiber reinforced plastic (CFRP)
Class 1 20 + 2% CFRP (by wt) Class 2 30 + 2% CFRP (by wt)
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. Unless otherwise specified, the following specifications and standards of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation, form a part of this specification to the extent specified herein.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Director, U.S. Army Materials and Mechanics Research Center, ATTN: DRXMR-SMS, Watertown, MA 02172 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
FSC 9330
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business