A-A-2681
3.4.1 Penciling and erasing. A pencil line shall be erasable without causing ghosting or smudging or any appreciable change of color of the erased surface when tested as specified in 4.6.5.1.
3.4.2 Inking and erasing. Inked lines shall show no appreciable spreading, feathering, ragged edges or skips, upon being drawn over a fresh or an erased are when tested as specified in 4.6.5.2.
3.5 Adhesive bond. The adhesive shall have a minimum peel of 1 lb./in. width when tested as specified in 4.6.6.
3.6 Back printing (rolls only). When specified (see 6.2) in the contract or purchase order, rolls shall be furnished with back printing on the paper back to facilitate accuracy in cutting. The back printing shall be in conformance with normal commercial practices.
3.7 Workmanship. The plastic sheet shall be free from ragged edges, die lines, cracks, holes, pits, gel marks, blisters, discolorations and other defects which would affect the serviceability of the item. The terms cited in this paragraph shall be defined as in ASTM d 883.
3.8 Regulatory requirements. In accordance with section 23.403 of the Federal Acquisition Regulations, the Government’s policy is to acquire items composed of the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory level of competition without adversely affecting performance requirements or exposing suppliers’ employees to undue hazards from the recovered materials. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. The term “recovered materials” means materials which have been collected or recovered from solid waste and reprocessed to become a source of raw materials as opposed to virgin raw materials. None of the above shall be interpreted to mean that the use or rebuilt products are allowed under this commercial item description unless otherwise specified.
3.9 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch/pound units, provided they fall within the tolerances specified using conversation tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this commercial item description are met.
3.10 Commercial item. The use of the term “commercial item description” in this document does not imply that any item or items offered are not required to conform with all requirements specified herein.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business