A-A-2681
6. NOTES
6.1 Intended use.
6.1.1 Type I, Class I, and Type II. The plastic sheet is intended for use in the protection of cards and documents.
6.1.2 Type I, Class 2. The plastic sheet is intended for use in the preparation of illustrations, sketches, drawing and etc. It provides a suitable surface for marking, lettering, writing and erasing.
6.2 Ordering data. Purchasers should select the preferred options permitted herein and include the following information in procurement documents (if applicable).
a. Title, number and date of this commercial item description.
b. Type, class and size required (see 1.2).
c. Back printing of rolls if required (see 3.6).
d. The preservation, packaging, packing, labeling, and marking desired.
6.3 Part Numbering. Plastic sheet conforming with this commercial item description shall be identified by a part number configuration consisting of identification of a portion of this specification number, type, class, and size number. An example of the part number configuration is shown below. This part numbering system is intended for identification and cross-indexing of the item within the Federal cataloging system. Part numbers are not required to be placed on the product or container.
AA2681-121 Example- Type I, Class 2, Size No.1
AA2681- General Specification Number.
121- Type (1-Type I or 2-Type II)
Class (1, 2, or 0 for type II items.
Size Number (1, 2, 3, 4, 5, or 6)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business