MIL-M-46862B (MI)
e. Probe the resin until it will no longer form strings when the probe is removed.
f. Stop the watch and record the gel time.
g. Report the individual and average values of five tests. The material shall conform to 3.3.1.
4.6 Packaging, packing and marking. The inspector shall ascertain that packaging, packing and marking of the material shall conform to this specification.
4.7 Workmanship. The material shall be visually examined to assure conformance to workmanship requirement of 3.5.
5. PACKAGING
5.1 Preservation, packing, unitization and marking. Preservation, packing, unitization and marking shall be Level C (see 6.2).
5.1.1 Level C. Preservation, packing, unitization and marking shall be in accordance with ASTM D 3951. Additional marking shall include, but not be limited to, the following:
a. Manufacturer's name and address b. Manufacturer's designation
c. Batch number
d. Date of manufacture
e. Number of this specification.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The material is intended for use as compression molded, high strength plastic parts.
6.2 Acquisition requirements. Acquisition documents must specify the following:
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business