MIL-P-46183
4.2.1 Preproduction tests. Unless otherwise specified (see 6.2), prepro- duction tests shall consist of tests for the following properties:
a. Flexural modulus
b. Heat deflection temperature c. Water absorption
d Impact strength e. Oxygen index
f. Specific optical density g. Volume resistivity
h. Dielectric strength
The supplier shall furnish to the procuring activity (in lieu of continuous lot-to-lot testing) a certificate of compliance, which certifies that the requirements for the properties listed in (a) through (h) above have been met (see 3.2 through 3.5).
4.2.2. Quality conformance tests. Unless otherwise specified (see 6.2), quality conformance tests shall consist of tests for the following properties:
a. Melting point
b. Specific gravity c. Tensile strength
d. Elongation at break e. Fiber content
4.2.2.1 Lot size. Lot size shall consist of all the molding or extrusion material manufactured at one time, from one batch, forming part of one contract or order, and submitted for acceptance at the same time and place.
4.2.2.2 Sampling. Unless otherwise specified (see 6.2), a sufficient quantity of material from one unit representative of each lot (4.2.2.1) shall be selected at random for quality conformance testing. Each container of material shall be considered as a unit of product. Failure of sample to meet the quality conformance requirements shall be cause for lot rejection.
4.3 Test methods. The properties of the PEEK thermoplastic materials specified in 3.2 through 3.5 shall be determined in accordance with the applicable test method in table V.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business