MIL-P-46183
TABLE V. Test methods.
Property Test Method
Melting point ASTM D3418
Glass transition temperature ASTM D34l8
Specific gravity ASTM D792
Tensile strength ASTM D638
Elongation at break ASTM D638
Flexural modulus ASTM D790
Heat deflection temperature ASTM D648
Water absorption ASTM D570
Fiber content (types II and III only) ASTM D3l7l
Izod impact strength ASTM D256
Oxygen index ASTM D2863
Specific optical density ASTM F8l4
Volume resistivity ASTM D257
Dielectric strength ASTM D149
5. PACKAGING
5.1 Preservation. Preservation shall be level A or Industrial as specified
(see 6.2).
5.1.1 Level A. Unless otherwise specified, the material shall be packed in one of the following types of containers:
a. Fiber drums conforming to PPP-D-723, type II, grade A, or type III, grade A in quantities of 90 kg (200 lbs) maximum.
b. Metal drums conforming to PPP-D-729, type III or type IV, in quantities of 181 kg (400 lbs), maximum.
Insofar as practical, drums shall be of uniform shape and size, with minimum cube and tare consistent with the protection required. Drums shall contain identical quantities and shall be closed in accordance with the applicable container specification. Fiber drums shall be furnished with a 4 mil thick polyethylene liner properly heat sealed.
5.1.2 Industrial. The material shall be packed in accordance with
ASTM D395l.
5.2. Marking. In addition to any special marking required by the contract or purchase order, shipping containers shall be marked in accordance with MIL-STD-
129, with the exception that industrial marking in accordance with ASTM D3951 applies for industrial packaging only.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business