INCH-POUND
MIL-PRF-5425E
5 October 1998
SUPERSEDING
MIL-P-5425D
28 September 1979
PERFORMANCE SPECIFICATION
PLASTIC SHEET, ACRYLIC, HEAT RESISTANT
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers optical quality, transparent, heat-resistant, cast acrylic
plastic sheet. The requirements are for flat sheet material that has not been formed.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Non-Government publications. The following documents form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of the documents which are
DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless
otherwise specified, the issues of documents not listed in the DoDISS are the issues of the
documents cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: Commander, Naval Air Warfare
Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100, by
using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the
end of this document or by letter.
AMSC N/A
FSC 9330
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business