MIL-PRF-87260B(USAF)
1.
SCOPE
1.1 Scope.
This document covers the requirements for an electrically conductive open-celled foam material
that will be used for explosion suppression in aircraft fuel.
1.2 Classification.
The conductive explosion suppression material (ESM) will be of the following classes and
grades (see 6.6):
Class 1 ESM to be used for single point and over-wing refueling throughout the
temperature range of +10 to +160°F
Grade I Coarse pore
Grade II Fine pore
Class 2 ESM to be used for single point and over-wing refueling throughout the
temperature range of -25 to +160°F
Grade I Coarse pore
Grade II Fine pore
2.
APPLICABLE DOCUMENTS
2.1 General.
The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended
for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified
are listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks.
The following specifications, standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
A-A-208
Ink, Marking, Stencil, Opaque (Porous and Non-Porous
Surfaces)
A-A-3174
Plastic Sheet, Polyolefin
1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business