MIL-DTL-24191D(SH)
1.2.2 White translucent sheet is of the type and grade specified in
table I (see 6.2). The thickness in table I is a requirement of the type and
grade specified.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not include
documents in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of
this specification, whether or not they are listed.
2.2
Government documents.
Not applicable.
2.3 Non-Government publications. The following document(s) form a part
of this document to the extent specified herein. Unless otherwise specified,
the issues of the documents which are DoD adopted are those listed in the
issue of the DoDISS cited in the solicitation. Unless otherwise specified,
the issues of documents not listed in the DoDISS are the issues of the
documents cited in the solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D 256 - Impact Resistance of Plastics and Electrical
Insulating Materials, Standard Test Methods for.
ASTM D 542 - Index of Refraction of Transparent Organic
Plastics, Standard Test Method for. (DoD
adopted)
ASTM D 570 - Water Absorption of Plastics, Test Methods for.
(DoD adopted)
ASTM D 635 - Rate of Burning and/or Extent and Time of Burning
of Self-Supporting Plastics in a Horizontal
Position, Test Methods for. (DoD adopted)
ASTM D 648 - Deflection Temperature of Plastics Under Flexural
Load, Standard Test Method for. (DoD adopted)
ASTM D 788 - Poly (Methyl Methacrylate) (PMMA) Molding and
Extrusion Compounds, Standard Classification
System for.
ASTM D 790 - Flexural Properties of Unreinforced and
Reinforced Plastics and Electrical Insulating
Materials, Standard Test Methods for.
ASTM D 792 - Density and Specific Gravity (Relative Density)
of Plastics by Displacement, Standard Test
Methods for.
ASTM D 1003 - Haze and Luminous Transmittance of Transparent
Plastics, Standard Test Methods for. (DoD
adopted)
ASTM D 1925 - Yellowness Index of Plastics, Standard Test
Methods for.
ASTM D 2843 - Density of Smoke from the Burning or
Decomposition of Plastics, Standard Test Method
for. (DoD adopted)
ASTM E 167 - Goniophotometry of Objects and Materials,
Standard Recommended Practice for. (DoD
adopted)
ASTM E 308 - Computing the Colors of Objects by Using the CIE
System, Standard Test Method for.
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.)
2.4 Order of precedence. In the event of a conflict between the text of
this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business