MIL-M-46861B (MI)
4.9 Examinations. The material shall be visually examined to ensure conformance to the workmanship requirement specified in 3.5.
5. PACKAGING
5.1 Preservation, packing, and marking. Level C Packaging (see 6.2).
5.1.2 Level C. Preservation, packing, and marking shall be in accordance with
MIL-STD-1190. Additional marking shall include, but not be limited to the following:
a. Lot or batch number. b. Date of manufacture. c. Type.
d. Width and yardage.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. This material is intended for use as a compression molding material for high strength reinforced plastic components.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of the specification. b. Type required (see 1.2 and 5.1.2).
c. Issue of DODISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced (see 2.1.1).
d. When first article is required (see 3.1 and 4.4). e. First article sample size (see 4.4).
f. Quantity and roll size (see 5.1.2). g. Width (see table I and 5.1.2).
h. Requirement for certification of storage life (see 3.2.5).
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business