MIL-P-85878
MILITARY
MIL-STD-105 Sampling Procedures and Tables for Inspection by Attributes
MIL-STD-129 Marking for Shipment and Storage
ENGINEERING HANDBOOK SERIES FOR AIRCRAFT REPAIR
01-1A-12 Fabrication, Maintenance, and Repair of Transparent Plastics or T.O. 1-1A-12 (Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are
available from the Defense Printing Service Detachment Office, Bldg 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
2.2 Non-Government publications. The following document(s) form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted are those listed in the issue of the DODISS specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D542 Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM D570 Standard Test Method for Water Absorption of Plastics
ASTM D635 Rate of Burning and/or Extent and Time of Burning of Self-Supporting
Plastics in a Horizontal Position
ASTM D637 Surface Irregularities of Flat Transparent Plastic Sheets
ASTM D792 Standard Test Methods for Specific Gravity (Relative Density) and Density of
Plastics by Displacement
(Application for copies should be addressed to American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
UNIFORM CLASSIFICATION COMMITTEE Uniform Freight Classification Rules
(Application for copies should be addressed to Uniform Classification Committee, 202 Chicago Union Station, Chicago, IL 60606.)
(Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulation unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. This specification makes provisions for first article testing (see 6.2).
3.2 Data. Unless otherwise specified in the contract or order, no data (other than reports and drawings accompanying first article samples) are required by this specification or any of the documents referenced in section 2 herein (see 6.2).
3.3 Materials. Materials shall be transparent, cellulose-acetate plastic conforming to all requirements of this specification applicable to the particular type and completely suitable for the intended use.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business