MIL-P-85878
4.6 Record of test results. The results of tests listed in 4.7 shall be recorded as specified in table V.
TABLE II. Examination for defects (appearance, workmanship, and marking)
Examine |
Defects |
Appearance |
Material not uniform finish, color, transparency, or opacity (as applicable); not in accordance with contract requirements. Not clean, presence of dirt, foreign materials, embedded particles. Any cracks, cuts, breaks, holes, wrinkles or distortion. |
Workmanship |
Sheets not flat, edges not cleanly cut or square. Bubbles, striations, or blemishes. Note: Minor optical imperfections and blemishes shall be evaluated as indicated in 3.14 before being scored as defects |
Identification |
Individual sheets or cover materials not marked for identification as specified in 3.17. |
TABLE III. Examination for defects (dimensional)
Examine |
Defects |
|
Length and width |
Unless otherwise specified by contract or drawing, varies by more than +1/6 inch (+ 1.59 mm) from required size. |
|
Thickness |
Varies by more than +0.004 inch (+0.10 mm) from nominal thickness specified in 3.15.2 or 3.16.2, as applicable. |
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business