MIL-PRF-23653D
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9510-AB-ATM-010
-
Nuclear Powered Submarine Atmosphere Control Manual
(Copies of this document are available from the Naval Logistics Library, 5450 Carlisle Pike, Mechanicsburg,
PA 17055 or online at https://nll.ahf.nmci.navy.mil).
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AMERICAN NATIONAL STANDARDS INSTITUTE
ANSI S2.61
-
Guide to the Mechanical Mounting of Accelerometers
(Copies of this document are available from American National Standards Institute, 25 W. 43rd St, 4th Floor,
New York, NY 10036 or online at https://webstore.ansi.org/).
ASTM INTERNATIONAL
ASTM D635
-
Standard Test Method for Rate of Burning and/or Extent and Time of
Burning of Plastics in a Horizontal Position
ASTM D2240
-
Standard Test Method for Rubber Property - Durometer Hardness
(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org).
SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SSPC-SP 10
-
Near-White Blast Cleaning
(Copies of this document are available from SSPC Publication Sales, 40 24th Street, 6th Floor, Pittsburgh, PA
15222-4656 or online at www.sspc.org).
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. The plastic vibration damping tiles furnished under this specification shall be products that
are authorized by the qualifying activity for listing on the applicable qualified products list before contract award
3.1.1 Requalification in case of reformulation. Any changes in the formulation of the vibration damping tiles
submitted for qualification testing shall be cause for requalification of the product.
3.2 Materials. The formulations for the tiles shall consist of the ingredients necessary to obtain the damping
characteristics and physical properties described herein.
3.2.1 Toxicity. When evaluated in accordance with 4.4.9, the plastic vibration damping tiles shall have no
adverse effect on the health of personnel when used for its intended purpose and shall not pose any environmental
3.2.2 Off-gassing. The plastic vibration damping tiles shall be certified for, and assigned, a usage category of
either "Permitted" or "Limited" in accordance with the Submarine Atmospheric Control Manual, NAVSEA
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business