MIL-DTL-62474F
inspection of contractor records providing proof or certification that materials conform to
requirements. Applicable records shall include drawings, specifications, design data, receiving
inspection records, processing and quality control standards, vendor catalogs and certifications,
industry standards, test reports, and rating data.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as
specified in the contract or order (see 6.2). When actual packaging of materiel is to be
performed by DoD personnel, these personnel need to contact the responsible packaging activity
to ascertain requisite packaging requirements. Packaging requirements are maintained by the
Inventory Control Point's packaging activity within the Military Department or Defense Agency,
or within the Military Department's System Command. Packaging data retrieval is available
from the managing Military Department's or Defense Agency's automated packaging files, CD-
ROM products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature which may be
helpful, but is not mandatory.)
6.1 Intended use. The laminates furnished under this specification are intended for use
as a component of composite armor. Since these laminates must maintain a ballistic resistance
sufficient to survive under extreme battlefield conditions, under which commercial alternatives
characteristically fail, this item is military unique.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number, and date of this specification.
b.
Type and class (see 1.2).
c.
When first article is required (see 3.1).
d.
Production component dimensions and ply count (see 3.3.1).
e.
Identify the test site by the procuring activity (see 4.2)
f.
If ballistic control test is required (see 4.3.5).
g.
Packaging requirements (see 5.1).
h.
Part or identifying number (PIN) (see 6.4).
6.3 Test samples. Ballistic test samples should be sent to: Commander, U.S. Army
Aberdeen Test Center, 400 Colleran Road. Bldg. 358, ATTN: CSTE-DTC-AT-SL-V
(D. Gessleman), Armor Acceptance B690, Aberdeen Proving Ground, MD 21005-5059 (see
4.3.5).
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business