MIL-DTL-62474F
2.3 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
ASTM INTERNATIONAL
ASTM D123
-
Standard Terminology Relating to Textiles (DoD Adopted)
ASTM D629
-
Standard Test Methods for Quantitative Analysis of
Textiles (DoD Adopted)
ASTM D2563
-
Standard Practice for Classifying Visual Defects in Glass-
Reinforced Plastic Laminate Parts (DoD Adopted).
ASTM D3775
-
Standard Test Method for Warp (End) and Filling (Pick)
Count of Woven Fabrics (DoD Adopted).
ASTM D3776
-
Standard Test Method for Mass Per Unit Area (Weight) of
Fabric (DoD Adopted).
(Copies of the above documents are available at ASTM International, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959 or through their website at https://www.astm.org)
SAE INTERNATIONAL
AMS 3902
-
Cloth, Organic Fiber (Para-Aramid), High Modulus for
Structural Composites (DoD Adopted).
(Copies of the above documents are available at SAE International, 400 Commonwealth
Drive, Warrendale, PA 15096 or through their website at https://www.sae.org)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business