MIL-STD-2199A
3.1.12 SSPC-SP 1. Solvent cleaning - Removal of all detrimental foreign matter such as oil, grease, dirt, soil, salts, drawing and cutting compounds, and other contaminants from steel surfaces by the use of solvents, emulsions, cleaning compounds, steam, or other similar materials and methods which involve a solvent or cleaning action.
3.1.13 SSPC-SP 5. White metal blast cleaning - Removal of all mill scale, rust, rust scale, paint or foreign matter by the use of abrasives propelled through nozzles or by centrifugal wheels. A white metal blast cleaned surface finish is defined as a surface with a gray-white, uniform metallic color, slightly roughened to form a suitable anchor pattern for coatings. The surface, when viewed without magnification, is to be free of all oil, grease, dirt, visible mill scale, rust, corrosion products, oxides, paint, or any other foreign matter.
3.1.14 Tack. The condition of a coated surface that is sticky to the touch.
3.1.15 Thixotropic. A characteristic of resins to which a finely divided (powder) fumed silica has been added, which thickens the resin to the degree that it will not flow or move unless spread by squeegee or brush.
3.1.16 Wet-out. The ability of a resin to "wet" or saturate the reinforcing fibers and completely displace the air in the material fibers. Also, the process of applying resin to reinforcement.
3.2 Acronyms.
3.2.1 AER - Alteration equivalent to repair
3.2.2 AFT - After
3.2.3 AMS - Aerospace material specifications
3.2.4 AMSDL - Acquisition management systems and data requirements control list
3.2.5 CFR - Code of Federal Regulations
3.2.6 CID - Commercial Item Description
3.2.7 CPP - Controllable pitch propeller
3.2.8 CuNi - Copper-nickel
3.2.9 DoD - Department of Defense
3.2.10 DTNSRDC - David Taylor Naval Ship Research and Development Center
3.2.11 EPA - Environmental Protection Agency
3.2.12 ft2 - Square feet
3.2.13 GRP - Glass reinforced plastic
3.2.14 MIL - Military
3.2.15 MS - Maintenance standard
3.2.16 MSDS - Material safety data sheet
3.2.17 NACE - National Association of Corrosion Engineers
3.2.18 NAVSEA - Naval Sea Systems Command
3.2.19 NSTM - Naval Ships' Technical Manual
3.2.20 r/min - Revolutions per minute
3.2.21 RMC - Regional maintenance center
3.2.22 SAE - Society of Automotive Engineers
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business