MIL-STD-2199 Coverings For Waterborne Main Propulsion Shafting On U.S. Naval Surface Ships And SubmarinesThis standard covers standard practices for the application of a four-layer shaft covering system on the body areas of waterborne main propulsion shafting. Material and application requirements are also provided for coatings that are to be applied to waterborne shaft flange assemblies.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40

MIL-STD-2199A

6. NOTES

(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)

6.1 Intended use. This standard describes detailed instructions for the preparation and drydock repair of the four-layer covering system for waterborne propulsion shafting. Application of the four layers is to take place in a clean, dry environment with the appropriate temperature range.

6.2 Acquisition requirements. Acquisition documents should specify the following:

a. Title, number, and date of this standard.

6.3 Subject term (key word) listing. Epoxy

Epoxy polysulfide coating

Polysulfide sealant

Woven fiberglass

6.4 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.