A-A-1280 - Sorbent, Oil (Roll, Sweep, Pad)
This CID covers oil sorbents for pickup of small oil spills.
A-A-1281 - Sorbent, Of (Particulate)
This CID covers oil sorbents for pickup of large oil spills in open areas.
A-A-1282 - Sorbent, Oil (Enclosed)
This CID covers oil sorbents for pickup of small oil spills. The oil sorbents shall be of the following types and classes: Type I - Boom Type II - Pillow Class 1 - Reusable Class 2 - nonreusable
A-A-2681 - Plastic Sheet, Pressure Sensitive Adhesive Coated, Paper-Backed (S/S By A-A-2848)
This commercial item description covers cellulose acetate and polyester plastic sheets having an adhesive paper-backing.
A-A-2848 - Plastic Sheet, Polyethylene Terephthalate (Pet) And Glycol-Modified Polyethylene Terephthalate (Petg)
A-A-52446 - Sheet Molding Compound: Low Shrinkage (Metric)
This CID covers requirements for a high strength, low shrinkage, sheet molding compound (SMC) and molded plastic parts made therefrom. The low shrinkage property imparts dimensional stability to the molded parts. Items made from this material are primarily used for nonappearance, high strength body panels that are not painted.
A-A-56021 - Plastic Sheet, Polyethylene, Terephthalate (For Cartographic Operations)
A-A-56029 - Molding Material, Sheet, Fiber Reinforced
This commercial item description establishes requirements for a fiber reinforced sheet molding material used to mold structural hardware.
AWWA-C105 - Encasement, Polyethylene, For Ductile-Iron Piping For Water And Other Liquids
FED-STD-406 - Plastics: Methods Of Testing (S/S By - See Cancellation Notice For Recommended Superseding Astm Test Methods)
HH-P-256 - Phenolic-Condensation-Products; Laminated (For Electrical Purposes) (S/S By L-L-31)
JAN-P-13 - Plastic-Materials, Laminated, Thermosetting: Sheets And Plates (S/S By Mil-P-997, Mil-P-3115, Mil-P-15035 And Mil-P-15047)
L-A-499 - Allyl Plastic Sheet, Rod, And Tube
L-C-169 - Cellulose Acetate Plastic Sheets (S/S By L-P-504)
L-C-530 - Coating, Pipe, Thermoplastic Resin
L-E-210 - Ethyl Cellulose Molded Plastics (Use Astm D787)
L-G-425 - Glazing Material, Flexible Reinforced Plastic (S/S By L-P-1196)
L-L-31 - Laminated Thermosetting Sheet, Rod And Tube (S/S By L-P-509A
L-M-181 - Melamine Molded Plastics (S/S By Astm-D704)
L-M-500 - Molding Plastic, Methacrylate (S/S By L-P-380)
L-M-505 - Molding Plastic, Cellulose Acetate (S/S By L-P-397)
L-M-520 - Molding Plastic, Polystyrene
L-M-525 - Molding Plastic, Polystyrene, Modified
L-M-530 - Molding Plastic, Polyvinyl Chloride, Rigid (S/S By L-P-1035)
This specification covers the requirements for rigid polyvinyl molding and extruding compounds (see 6.1).
L-P-001174 - Plastic Sheet And Film Chlorotrifluoroethylene (Ctfe) Copolymer, Extruded
L-P-00514 - Plastic Sheet, Adhesive Coated, Paper Backed (S/S By L-P-528)
L-P-00524 - Plastic Sheet, Polyethylene, Laminated, Nylon Reinforced
L-P-00529 - Plastic Strip, Plastic Strip With Adhesive Packing, Sign, Plain And Reflectorized
L-P-1035 - Plastic Molding Material, Vinyl Chloride Polymer And Vinyl Chloride-Vinyl Acetate Copolymer, Rigid (S/S By Astm-D1784)
This specification covers rigid polyvinylchloride and vinyl chloride-vinyl acetate copolymer material in the form specified by the procuring agency.
L-P-1036 - Plastic Rod Solid, Plastic Tubes And Tubing, Heavy Walled, Polyvinyl Chloride, Rigid (S/S By Astm-D1784)
L-P-1040 - Plastic Sheets And Strips (Polyvinyl Fluoride)
L-P-1041 - Plastic Molding And Extrusion Material, Vinylidene Chloride Vinyl Chloride Copolymer
L-P-1125 - Plastic Molding Material Phenolic Resin (Use Astmd 700 And Mil-M-14)
L-P-1183 - Plastic Molding Material, Acrylonitrile-Butadiene-Styrene (Abs), Rigid (S/S By Astm-D1788)
L-P-1196 - Plastic Sheet, Flexible, Reinforced
L-P-310 - Phenolic Molded Plastics (S/S By L-P-1125)
L-P-344 - Plastics, Cellulose Acetate, Molded (S/S By L-M-505)
L-P-349 - Plastic Molding And Extrusion Material, Cellulose Acetate Butyrate (S/S By Astm-D707)
This specification covers the requirements for cellulose acetate butyrate material.
L-P-365 - Plastics, Cellulose Nitrate (Pyroxylin), Sheets, Rods And Tubes
L-P-380 - Plastic Molding Material Methacrylate
L-P-383 - Plastic Material, Polyester Resin, Glass Fiber Base, Low Pressure Laminated
L-P-385 - Plastic Molding And Extrusion Material, Polychlorotrifluoroethylene (S/S By Astm-D1430)
This specification covers the requirements for polychlorotrifluoroethylene plastics suitable for injection molding, compression molding, and extrusion.
L-P-386 - Plastic Material, Cellular, Urethane (Flexible)
L-P-387 - Plastic Sheet, Laminated, Thermosetting (For Designation Plates) (S/S By Astm-D709)
L-P-389 - Plastic Molding Material, Fep Fluorocarbon, Molding & Extrusion (Replaced By Astm-D2116-81
L-P-390 - ( Images) Plastic, Molding And Extrusion Material, Polyethylene And Copolymers (Low, Medium, And High Density)
L-P-391 - Plastic Sheets, Rods And Tubing, Rigid Cast, Methacrylate (Multiapplication) (S/S By Astm-D4802 And Astm-D5436))
L-P-392 - Plastic Molding Material, Acetal, Injection And Extrusion (S/S By Astm-D4181)
L-P-393 - Plastic Molding Material Polycarbonate, Injection And Extrusion (S/S By Astm-D3935)
This specification covers one type of polycarbonate molding and extrusion material for general-purpose use.
L-P-394 - Plastic Molding Material, (Propylene Plastics, Injection And Extrusion) (S/S By Astm-D4101)
This specification covers polypropylene and propylene copolymer injection and extrusion plastic molding materials.
L-P-395 - Plastic Molding And Extrusion Material, Nylon, Glass Fiber Reinforced (Use Astm D 4066)
L-P-396 - Plastic Molding And Extrusion Material, Polystyrene (S/S By Astm-D4549)
This specification covers the requirements for polystyrene materials suitable for molding and extrusion.
L-P-397 - Plastic Molding Material, Cellulose Acetate (S/S By Astm-D706)
This specification covers certain general purpose plasticized cellulose acetate compounds suitable for injection molding.
L-P-398 - Plastic Molding Material, Styrene-Butadiene (S/S By Astm-D4549)
This specification covers styrene-butadiene molding and extrusion material.
L-P-399 - Plastic Molding And Extrusion Material Styrene-Acrylonitrile Copolymers (S/S By Astm-D4203)
This specification covers rigid unfilled styrene-acrylonitrile copolymer materials for injection molding and extrusion applications.
L-P-401 - Plastic Molding Material, Urea-Formaldehyde
L-P-403 - Plastic Molding Material, Polytetrafluoroethylene (Tfe - Fluocarbon) (Use Astm-D1457)
This specification covers molding and extrusion material of TFE-fluorocarbon resin. It does not cover items molded or extruded from the material.
L-P-406 - Plastics, Organic, General Specification, Test Methods (S/S By Fed. Std. 406)
L-P-410 - Plastic, Polyamide (Nylon), Rigid: Rods, Tubes, Flats, Molded And Cast Parts
L-P-501 - Plastic Polyviwylidene Chloride (Saran) Molded (Use L-P-1041)
L-P-503 - Plastic Rod, Solid, Polyvinyl Chloride, Rigid (S/S By L-P-1036)
L-P-504 - Plastic Sheet And Film, Cellulose Acetate
L-P-505 - Plastic Panels, Corrugated, Translucent, Glazing
L-P-506 - Plastic Sheet & Film, Polystyrene Biaxially Oriented (Replaced By Astm D1463-81
L-P-507 - Plastic Sheet, Extruded Acrylic
L-P-508 - Plastic Sheet, Laminated, Decorative And Nondecorative (S/S By Nema-Ld3 And Nema-Ld3.1)
L-P-509 - Plastic Sheet, Rod And Tube, Laminated, Thermosetting (S/S By Astm-D709)
L-P-510 - Plastic Sheet (Sheeting) Vinyl Chloride Polymer And Vinyl Chloride-Vinyl Acetate Copolymer, Rigid (S/S By L-P-535)
L-P-511 - Plastic Sheet, Laminated, Thermosetting, Cotton Fabric Base, Phenolic-Resin, Post-Forming
This specification covers the requirements for one grade of thermosetting, laminated plastic material intended for forming into compound shapes.
L-P-512 - Plastic Sheet (Sheeting); Polyethylene (S/S By Astm-D2103)
L-P-513 - Plastic Sheet And Insulation Sheet, Electrical (Laminated, Thermosetting, Paper-Base, Phenolic-Resin) (S/S By Astm-D709)
L-P-515 - Plastic Sheet, Polystyrene, Modified (Use L-P-526 And L-P-527)
L-P-516 - ( Images) Plastic Sheet And Plastic Rod, Thermosetting, Cast
This specification covers the requirements for thermosetting resins cast for monomers or from partly polymerized material into sheets, rods, tubes, and other forms, for use in military equipment.
L-P-517 - Plastic Sheet, Scribe-Coated
This specification covers scribe-coated plastic material.
L-P-519 - Plastic Sheet: Tracing, Glazed And Matter Finish
L-P-523 - Plastic Sheet And Film, Fep-Fluorocarbon, Extruded (S/S By Astm-D3368)
This specification covers extruded, unfilled, unpigmented, FEP-fluorocarbon sheet and film.
L-P-526 - Plastic Sheet, Styrene-Acrylonitrile
L-P-527 - Plastic Sheet, Styrene-Butadiene
This specification covers the requirements for sheets made from molding materials conforming to the requirements of L-P-398.
L-P-528 - Plastic Sheet, Pressure Sensitive Adhesive Coated, Paper-Backed (S/S By A-A-2681)
L-P-535 - ( Images) Plastic Sheet (Sheeting): Plastic Strip: Poly (Vinyl Chloride) And Poly (Vinyl Chloride-Vinyl Acetate), Rigid
L-P-540 - Plastic Tube And Tubing, Heavy Walled, Polyvinl Chloride, Rigid (S/S By L-P-1036)
L-P-550 - Plasic Vinyl Chloride, Cartographic Sheeting(Superseded Bl L-P 535)
L-P-590 - Plastic Compounds, Molding And Extrusion, Polyethylene (S/S By Fed Spec L-P-390)
L-T-0075 - Tape, Pipe-Coating, Pressure-Sensitive, Polyethylene
L-U-671 - Urea Molded Plastic (S/S By L-P-401)
L-V-345 - Vinyl Chloride Polymer And Copolymer Rigid Molded Plastics (S/S By L-M-530)
L-V-351 - Vinyl Chloride Polymer And Copolymer Rigid Sheets
MIL-A-46166 - Armor: Glass Reinforced Plastic Laminates (S/S By Mil-Prf-46103)
This specification covers Glass Reinforced Plastic Laminates for lightweight composite armor applications.
MIL-B-83353 - Boron Monofilament, Continuous, Vapor Deposited (Replaced By Sae-Ams3865)
This specification covers one type of high quality boron filament 0.0040 inch in nominal diameter produced by the hydrogen reduction of borontrichloride on a tungsten substrate.
MIL-B-83369 - Boron Filament Reinforcement, Continuous, Epoxy Resin Impregnated (S/S By Sae-Ams3867, Sae-Ams3867/1, Sae-Ams3867/2, Sae-Ams3867/3, Sae-Ams3867/4, Sae-Ams3867/5, And Sae-Ams3867/6)
This specification covers continuous 4-mil diameter boron filament-reinforced epoxy resin matrix prepreg of two types. All material to this specification is of one class (non-integral, woven glass fabric carrier) for making low pressure laminates for use up to 375 deg. F.
MIL-C-15567 - Cellulose - Nitrate - Plastic (Celluloid Or Pyroxylin Type) (For Use In Ammunition)
Composition A (stabilized) cellulose-nitrate-plastic is intended for use in powder wads and spacers. Composition B cellulose-nitrate-plastic discs are intended for use in fuzes, tracers, and primers.
MIL-C-17576 - Cellulose Acetate Sheet (For Inhibitor)
This specification covers cast or extruded cellulose acetate sheet for the fabrication of inhibitors.
MIL-C-18345 - Core Material, Cellular Cellulose Acetate
MIL-C-22627 - Coating, Conformal, Resin
MIL-C-24449 - Cast Polymethyl Methacrylate For Sheet Stock Custom Castings, And Finished Windows
This specification covers polymerized methyl methacrylate sheet stock, custom castings, and windows of optical quality for service in pressure vessels for human occupancy.
MIL-C-46866 - Compound, Insulating, Electrical And Application Of
MIL-C-46893 - Coating, Polyvinyl Fluoride
MIL-C-47027 - Compound, Molding, Plastic, Rigid, Thermoplastic (S/S By Astm-D3935 And Astm-D4181)
MIL-C-47028 - Compound, Molding, Silica Fiber Phenolic Impregnated
MIL-C-47083 - Compound, Molding, Fluorocarbon, Glass Filled
MIL-C-47138 - Coating, Polyvinyl Chloride
This specification covers a tough durable polyvinyl chloride coating which is used for preventing shedding of loose fibers from the surface and edges of insulation blankets. It is also suitable for corrosion and abrasion resistance on various surfaces such as steel, wood, and concrete.
MIL-C-47175 - Compound, Polyurethane, For Conformal Coating Of Electronic Circuitry
This specification covers polyurethane, solvent-based compounds for use as conformal coatings for printed circuit boards and other electronic circuitry.
MIL-C-47176 - Coating, Surface, Moisture Curing Polyurethane
MIL-C-47177 - Casting Compound, Epoxy Resin With Aromatic Amine Curing Agent
MIL-C-47221 - Compound, Molding, Epoxy Resin, Silicon Dioxide And Asbestos-Fiber Filled
This specification covers one type of molding compound consisting of a silicon dioxide, asbestos-fiber filled epoxy resin and a polyamine curing agent.
MIL-C-47224 - Compound, Molding, Transfer, Epoxy Resin, Single-Component
This specification covers one type of single-component, epoxy resin transfer molding compound for encapsulating, potting, and embedding electrical devices requiring good thermal conductivity.
MIL-C-47255 - Coating, Protective, For Printed Wiring Boards
MIL-C-47256 - Coating, For Printed Wiring Boards, Application Of
MIL-C-47258 - Compound, Dipping, Plastic, Plastisol
This specification covers one type of plastisol dipping compound consisting of polyvinyl chloride dispersed in suitable liquid plasticizers, with fungicide, stabilizer, pigments and fillers added.
MIL-C-47297 - Component, Plastic, Compression Molded
MIL-D-3054 - Dielectric Material, Polyethylene (S/S By L-P-390)
MIL-D-47225 - Disc, Plastic, Polyethylene Terephthalate, Pressure Sensitive, Adhesive Coated
MIL-DTL-24191 - Plastic Sheet, Cell Or Continuous Cast, Acrylic, Shipboard Application (Illumination And Signal Lighting)
This specification covers acrylic sheet material manufactured by the cell cast, continuous cast or melt (typically referred to as continuously manufactured sheet) process.
MIL-DTL-24466 - Polyethylene Bags, Sheet, And Tubing, Green
This document covers the requirements for pliable, green transparent polyethylene bags, sheet, and tubing.
MIL-DTL-25421 - Plastic Materials, Glass Fiber Base - Epoxy Resin, Low Pressure Laminated
This specification covers the requirements for glass fiber base, epoxy resin low pressure laminated plastic materials. The materials may be furnished as sheets or formed parts, as specified.
MIL-DTL-62474 - Laminate: Aramid-Fabric-Reinforced, Plastic
This specification covers an aramid fabric-reinforced plastic laminate for use in composite armor systems.
MIL-DTL-83054 - Baffle And Inerting Material, Aircraft Fuel Tank
This specification covers the requirements for a reticulated polyurethane foam for explosion suppression in aircraft fuel tanks and dry bay areas (cavities).
MIL-F-10336 - Fiber Sheet, Vulcanized (S/S By Astm-D710)
MIL-F-22735 - Film, Elastomeric, Fluorescent, For Weapons System (Asg)
MIL-F-46895 - Film, Plastic, Polyethylene Terephthalate
MIL-F-47222 - Foam, Polyurethane, Rigid (S/S By Sae-Ams3572)
This specification covers one type of gas-expanded, isocyanate-hydroxl reaction formed rigid polyurethane foam.
MIL-F-47254 - Foam, Polyurethane, Open Cell, Medium Flexibility
This specification covers one type of open cell poly-urethane foam, prefoamed, of medium flexibility.
MIL-F-47260 - Filler, Elastomeric, Impression Stamping
MIL-F-47285 - Foam, Polyurethane, Rigid
MIL-F-63463 - Film, Inhibiting, Ethyl Cellulose
This specification covers inhibiting film manufactured for use as the peripheral inhibiting wrap for rocket propellant grains (Ballistite type).
MIL-F-82700 - Film, Polyester
This specification covers three types of polyester film for use as burst diaphrams.
MIL-F-87090 - Foam, Combustion Retardant, For Cushioning Supply Items Aboard Navy Ships
This specification covers inherently combustion retardant flexible foams with low emission of smoke and toxic products to be used for the protection of fragile items aboard Navy ships.
MIL-F-8799 - Film, Elastomeric, Pigmented, For Use In The Manufacture Of Aircraft Decalcomanias (Asg) (S/S By Mil-M-43719)
MIL-G-21729 - Glass-Fiber Base Laminate, Epoxy Resin
MIL-G-46887 - Glass Roving, Resin Impregnated
MIL-G-47296 - Glass Roving, Resin Impregnated
MIL-G-83410 - Graphite Fiber Resin Impregnated Tape And Sheet, For Hand Layup
MIL-HDBK-139 - Plastic, Processing Of
The object of this handbook is to give the military design engineer information about plastic-conversion processes that will help him to achieve an optimum balance of service, economy and reliability.
MIL-HDBK-700 - Plastics
This handbook is one of a group which covers metallic and nonmetallic materials used in the design and construction of military equipment. The purpose of these handbooks is to provide current technical information and design data of direct usefulness to engineers and designers of military equipment.
MIL-HDBK-754 - Plastic Matrix Composites With Continuous Fiber Reinforcement
MIL-HDBK-755 - Plastic Material Properties For Engineering Design
This handbook provides a review of the material properties of plastics and their applicability to Army engineering design activities. The coverage is intended for those not familiar with plastics technology so they may learn more about the behavior of plastic material.
MIL-HDBK-797 - Polyamide (Nylon) Plastics: Properties, Processing, Performance, And Military Applications
This handbook provides a summary of nylon technology and technical information for these important plastic materials.
MIL-HDBK-803 - Glass Reinforced Plastics Preventative Maintenance And Repair
This handbook provides guidance for preventive maintenance of glass reinforced plastic (GRP) items, as well as instructions and illustrations on proper repair techniques for minor damage to reinforced plastic structures. Some specific equipments have their own dedicated repair instructions. For example, guidance on repair procedures for major repairs of boat hulls shall be in accordance with NAVSEA 0982-LP-019-0010, for submarine SONAR domes, see SE 300 BA-MMA-010/SONAR dome. Complete explanations of laminate properties and behavior, fabrication techniques, installation procedures, and other similar technical details do not fall within the scope of this handbook. This handbook does not cover repairs to very high performance applications such as aerospace structures, missile motor cases, pressure vessels, or filament-wound articles or repairs to articles primarily made with reinforcing fiber other than glass. This handbook does not apply to MIL-P-24608 products or to repair GRP piping materials.
MIL-I-17276 - Inhibitor, Cellulose Acetate, Extruded
Inhibitors shall be of the following composition, as specified: Composition- Cellulose acetate prepared from chemical cellulose (reference ASTM subcommittee 1 under D-23) and plasticized with dimethyl phthalate. The composition shall be 26 to 30 parts of plasticizer per 100 parts of cellulose acetate flake.
MIL-I-20053 - Plastic, Inserts And Adhesive (For Condenser Tubes)
MIL-I-3166 - Inhibitors, Web And End (Plastic)
This specification covers ethyl cellulose and cellulose acetate molded plastic inhibitors. (See 6.1)
MIL-L-24518 - Laminate, Vinyl Film-Aluminum, Decorative
This specification covers decorative vinyl film-aluminum laminate. The material is used as a decorative treatment for Naval shipboard bulkhead sheathing and miscellaneous furniture items, such as bookcases, partitions, and trim.
MIL-L-47178 - Lens, Plastic, Operation
MIL-M-14 - Molding Compounds, Thermosetting (S/S By Astm-D5948)
MIL-M-14/1 - Molding Compounds, Phenolic, Thermosetting, Containing Cellulose Fillers (S/S By Astm-D5948)
MIL-M-14/2 - Molding Compounds, Phenolic, Thermosetting, Containing Mineral/Glass Filler (S/S By Astm-D5948)
MIL-M-14/3 - Molding Compounds, Melamine, Thermosetting, Containing Cellulose, Mineral, Or Glass Fillers (S/S By Astm-D5948)
MIL-M-14/4 - Molding Compounds, Polyester, Thermosetting, Containing Mineral/Glass Fillers (S/S By Astm-D5948)
MIL-M-14/5 - Molding Compounds, Diallyl Iso-Phthalate Thermosetting, Containing Mineral Fillers, Glass Or Polymeric Filler (S/S By Astm-D5948)
MIL-M-14/6 - Molding Compounds, Diallyl Ortho-Phthalate, Thermosetting, Containing Mineral Fillers, Glass Or Polymeric Fillers (S/S By Astm-D5948)
MIL-M-14/7 - Molding Compounds, Silicone, Thermosetting, Containing Mineral/Glass Fillers (S/S By Astm-D5948)
MIL-M-14/8 - Molding Compounds, Epoxy Thermosetting, Containing Mineral/Glass Fillers (S/S By Astm-D5948)
MIL-M-14077 - Molding Plastic, Polytetrafluoroethylene (Tfe-Fluorocarbon Resin) (Use L-P-403)
MIL-M-14568 - Molding Plastic, Polystyrene Fabricated Parts
MIL-M-14569 - Molding Plastic, Cellulose Acetate, Fabricated Parts
MIL-M-14572 - Molding Plastic, Ethyl Cellulose Fabricated Parts
MIL-M-14584 - Molding Plastic, Polyvinyl Chloride, Rigid, Fabricated Parts
MIL-M-14590 - Molding Plastic, Polyethylene, Fabricated Part
MIL-M-14592 - Molding Plastic, Acrylic, Fabricated Parts
MIL-M-14612 - Molding Plastic, Melamine-Formaldehyde, Fabricated Parts
MIL-M-17953 - Molding Plastic, Silicon Resin, Thermosetting; And Molded Thermosetting Plastic Parts (S/S By Mil-M-14)
MIL-M-18794 - Molding Plastics And Molded Plastic Parts, Thermosetting, Diallyl Phthalate Resin (S/S By Mil-M-14)
MIL-M-19061 - Molding Plastic And Molded Plastic Parts, Thermosel-M-14F(No S/S Document)
MIL-M-19098 - Molding Plastic, Polyamide (Nylon), And Molded And Extruded Polyamide Plastic Parts --- Weather Resistant (Use Mil-M-20693 And L-P-410)
MIL-M-19536 - Molding Plastic And Molded Plastic Parts, Glass-Fiber Filled Phenolic Resin (S/S By Mil-M-14F)
MIL-M-19887 - Molding Plastic, Polyamide Resin (Nylon) Glass Fiber Filled, And Molded Polyamide Resin Glass Fiber Filled Plastic Parts (S/S By Astm-D4066)
MIL-M-20693 - Molding, Plastic, Polyamide (Nylon), Rigid (S/S By Astm-D4066)
This specification covers rigid polyamide (nylon) molding plastic to be used for general-purpose, weather-resistant, and dielectric applications.
MIL-M-21470 - Molding Plastic, Polychlorotrifluoroethylene (Use L-P-385)
MIL-M-21556 - Molding Plastic And Molded Plastic Parts, Asbestos-Fiber Filled, Arc-And Flame-Resistant Phenolic Resin (Use Mil-M-14)
MIL-M-21699 - Molding Plastic And Molded Plastic Parts, Mineral 14F(No S/S Document)
MIL-M-22123 - Molding Plastic, Polystyrene, Glass Filled, Fabricated Parts
MIL-M-22544 - Molding Plastic, Acrylonitrile-Butadiene--Styrene, Rigid (Use L-P-1183)
MIL-M-24325 - Molding Material, Plastic, Epoxy Compounds Thermosetting (S/S By Mil-M-14)
This specification covers the basic properties of thermosetting molding material, plastic, epoxy compounds, as such, and the methods suited to their satisfactory determination.
MIL-M-3165 - Molding Compounds (For Plastic Inhibitors)
MIL-M-3412 - Molding Plastic, Ethyl Cellulose
MIL-M-46069 - Molding Plastic, Glass/Epoxy Pre-Mix
This specification covers the requirements for an epoxy preimpregnated chopped strand premix molding compound.
MIL-M-46861 - Molding Material, Glass Mat, Epoxy Coated
This specification covers two types of epoxy coated glass mat molding,materials.
MIL-M-46862 - Molding Material, Glass, Epoxy Impregnated
This specification covers one type of epoxy impregnated glass molding material.
MIL-M-46891 - Molding Compound, Phenolic Resin, Asbestos Reinforced
This specification covers one type of asbestos reinforced phenolic resin molding compound used as insulation in rocket motors.
MIL-M-47026 - Molding Compound, Phenolic Resin, Quartz Reinforced
MIL-M-47029 - Molding, High Pressure, Processing Requirements For
MIL-M-47137 - Molding Compound, Transfer Moldable, Epoxy Base Resin
MIL-M-47223 - Material, Plastic, Laminated, Thermosetting Sheets, Orlon Fabric Base, Diallyl Phthalate-Resin
MIL-M-55004 - Molding Plastic, Polyamide (Nylon) Fabricated Parts.
MIL-M-55005 - Molding Plastic, Alkyd, Fabricated
MIL-M-55009 - Molding Plastic, Silicon Fabricated Parts
MIL-M-55027 - Molding Plastic, Polystyrene, Glass Filled, Fabricated Parts. ()Superseded By Mil-M-22123().
MIL-M-55030 - Molding Plastic, (Kel-F), Fabricated Parts.
MIL-M-83417 - Molding, Plastic, Short Fiber Reinforced, Structural (S/S By Sae-Ams3671)
This specification covers the requirements for ashort fiber reinforced structural molding plastic suitable for missile cases and other structural applications.
MIL-M-87176 - Molding Material, Polypropylene, Modified Mechanical Use Only (S/S By Astm-D4101-82R88)
MIL-N-18352 - Nylon Plastic, Flexible, Molded Or Extruded (S/S By Mil-P-22096)
MIL-P-10408 - Plastic Cellulose Acetate Molding Material And Molded Parts (Use L-M-505)
MIL-P-10420 - Plastic, Phenolic, Fabricated Parts
MIL-P-12420 - Plastic Material, Cellular, Elastomeric
MIL-P-13436 - Plastic Sheet, Filled Phenolic, Uncured
This specification covers uncured, filled-phenolic, plastic molding sheet used for molding parts for electronic, communications, and mechanical equipment.
MIL-P-14078 - Polytetrafluoroethylene (Teflon) Molded And Extruded Parts, Sheets, Rods And Tubing.
MIL-P-14118 - Plastic; Cellulose-Acetate, Sheets And Film (S/S By L-P-504)
MIL-P-14544 - Plastic, Cellulose Acetate Buty Rate Fabricated Parts
MIL-P-14571 - Plastic Polystyrene, Modified, Fabricated Parts
MIL-P-14591 - Plastic Film: Nonrigid, Transparent
MIL-P-15035 - Plastic Sheet: Laminated, Thermosetting, Cotton-Fabric-Base, Phenolic-Resin (S/S By Mil-I-24768/13, Mil-I-24768/14, Mil-I-24768/15 And Mil-I-24768/16)
MIL-P-15036 - Plastic-Material, Laminated, Thermosetting, Sheets, Paper-Base, Phenolic-Resin (S/S By Mil-P-3115)
MIL-P-16413 - Plastics, Methyl-Methacrylate, Molding Materials (Use L-P-380)
MIL-P-16414 - Plastics, Cellulose Acetate Butyrate, Molding Material (Use L-P-349)
MIL-P-16416 - Plastics, Cellulose Acetate, Molding Materials (Use L-P-397)
MIL-P-16591 - Plastic Material, Cellular, Polystyrene (S/S By Mil-P-40619)
MIL-P-16617 - Plastic, Thermosetting, Pulp-Filled Preforms
This specification covers one type of pulp-filled thermosetting plastic preforms for molding.
MIL-P-17091 - Polyamide (Nylon) Plastic, Rigid, Molded Parts, Rods And Flats (Use Mil-M-20693 And L-P-410)
MIL-P-17171 - Plastic, Laminate, Decorative, High Pressure
This specification establishes the requirements for protective, high pressure, decorative plastic laminates used to cover furniture and bulkhead surfaces, and for high pressure, decorative plastic laminates factory bonded by the laminate manufacturer to aluminum panels used for non-structural bulkheads and overheads.
MIL-P-17549 - Plastic Laminates, Fibrous Glass Reinforced, Marine Structural
This specification covers fibrous glass reinforced plastic laminates for use in marine applications. The characteristics defined for specific grades of laminate are representative of those laminates produced by good commercial practice.
MIL-P-17638 - Plastic Sheet, Polyvinylchloride, Rigid, High Impact (Use L-P-510)
MIL-P-17721 - Plastic Sheet, Laminated, Thermosetting, Glass Mat, Melamine Resin
MIL-P-17962 - Plastic Sheet, Cast Acrylic, Colored And White, Heat Resistant, Shipboard Lighting Fixture Application
MIL-P-17998 - Plastic Sheet, Vinyl Film, White, Table Covering
MIL-P-18080 - Plastic Sheets, Vinyl, Flexible, Transparent, Optical Quality
MIL-P-18177 - Plastic Sheet, Laminated, Thermosetting, Glass Fiber Base, Epoxy-Resin (S/S By Mil-I-24768/2 And Mil-I-24768/3)
This specification covers glass cloth, or oriented nonwoven parallel aligned glass fibers, epoxy-resin, plastic thermosetting sheet material primarily for electrical insulating purposes.
MIL-P-18324 - Plastic Material, Laminated Phenolic, For Bearings (Water Or Grease Lubrication)
This specification covers laminated phenolic resin cotton fabric base material. The material is available in the form of sheets or shapes. This specification is applicable only to sizes such that polished 1/2 inch cubes may be prepared from the material.
MIL-P-19095 - Plastic Sheet, Corrugated, Translucent, Glazing (Use L-P-505)
MIL-P-19161 - Plastic Sheet, Laminated, Glass Cloth Polytetrafluoroethylene Resin (S/S By Mil-I-24768/7)
MIL-P-19336 - Plastic Sheets, Polyethylene, Virgin And Borated, Neutron Shielding
MIL-P-19468 - Plastic Rods, Polytetraf(Uoroethylene Molded & Extruded (Future Acquisition Used Astm D1710)
MIL-P-19510 - Plastic Material, Cellular, Polystyrene, Thermal Insulation (S/S By Mil-P-40619)
MIL-P-19644 - Plastic Molding Material (Polystyrene Foam, Expanded Bead)
This specification covers shapes formed from expandable bead or pellet polystyrene and the general requirements for both the material and the shapes.
MIL-P-19644 - Plastic Molding Material (Polystyrene Foam, Expanded Bead)
MIL-P-19735 - Plastic Material, Molding, Acrylic, Colored And White, Heat Resistant, For Lighting Fixtures
MIL-P-19833 - Plastic Molding Material And Plastic Molded Parts, Glass Fiber Filled, Diallyl Phthalate Resin (Use Mil-M-14)
MIL-P-19904 - Plastic Sheets, Acrylonitrile-Butadiene-Styrene Terpolymer, Rigid
MIL-P-21094 - Plastic Sheet, Cellulose Acetate, Optical Quality
MIL-P-21105 - Plastic, Sheet, Acrylic, Heat Resistant, Utility Grade (S/S By L-P-391)
MIL-P-21347 - Plastic Molding Material, Polystyrene, Glass Fiber Reinforced (S/S By Astm-D4549)
MIL-P-21466 - Plastic Sheet, Laminated, Copper-Clad, Glass-Base Epoxy
MIL-P-21922 - Plastic Rods And Tubes, Polyethylene
This specification covers low, medium, and high density polyethylene rods and tubes for general purpose, dielectric, and wheather resistant applications.
MIL-P-21929 - Plastic Material, Cellular Polyurethane, Foam-In-Place, Rigid (2 Pounds Per Cubic Foot)
This specification covers only one class of foam, nominal density - 2.0 pounds per cubic foot, rigid unicellular polyurethane foam, and the materials required for preparation by the foam-in-place technique.
MIL-P-22035 - Plastic Sheets And Sheeting, Polyethylene (S/S By L-P-512)
MIL-P-22096 - Plastic, Polyamide (Nylon) Flexible Molding And Extrusion Material (See Notice 1 For Replacement Information)
MIL-P-22241 - Plastic Sheet (And Film) Polytetrafluoroethylene (Tfe-Fluorocarbon Resin) (S/S By Astm-D3293, Astm-D3308, And Astm-D3369)
MIL-P-22242 - Plastic Sheets, Polytetrafluoroethylene (Tfe-Fluorocarbon Resin) (S/S By Mil-P-22241)
MIL-P-22270 - Plastic Film, Polyester, Polyethylene Coated (For Identification Cards)
MIL-P-22296 - Plastic Tubes And Tubing, Polytetrafluoroethylene, (Tfefluorocarbon Resin), Heavy Walled (S/S By Astm-D1710)
MIL-P-22324 - Plastic Sheet, Laminated, Thermosetting, Paper-Base, Epoxy-Resin (S/S By Mil-I-24204)
This specification covers type PEE paper-base, epoxy-resin, plastic thermosetting sheet material primarily for electrical insulating purposes.
MIL-P-22581 - Plastic Tiles, Vibration Damping, Type Iii
This specification establishes the requirements for flexible fire-resistant plastic tile for damping the flexural vibration of metal structures on ships.
MIL-P-22693 - Plastic Laminates, Glass Fabric Base, High Strength
MIL-P-22748 - Plastic, Polethylene And Copolymers, High Density, Molding And Extrusion Material (Use L-P-390)
MIL-P-22985 - Plastic Molding And Extrusion Material, Ethyl Cellulose (See Notice 1 For Replacement Information)
MIL-P-23536 - Polyethylene Plastic Sheets, Virgin And Borated
This specification covers virgin and borated polyethylene plastic sheet material.
MIL-P-24249 - Plastic Material, Cellular Polyurethane, Rigid, Void Filler, Foam-In-Place, Large Scale And Installation Of
This specification covers a resin material and installation system which, after mixing and installation in a void, will form a rigid, foam-in-place type unicellular urethane foam.
MIL-P-24333 - Plastic Material, Unicellular, Sheet, Elastomeric (S/S By Mil-P-15280)
MIL-P-24364 - Plastic Sheets, Laminated, Thermosetting, Electrical Insulating Sheet, Glass-Mat (S/S By Mil-I-24768)
This specification covers laminated plastic sheets for mechanical and electrical applications.
MIL-P-24364/1 - Plastic Sheets, Laminated, Thermosetting Electrical-Insulating Sheet, Polyester Glass-Mat Grade Gpo-N1 (Classes 130, 155, And 180) (S/S By Mil-I-24768/4)
MIL-P-24364/2 - Plastic Sheets, Laminated, Thermosetting Electrical-Insulating Sheet, Polyester Glass-Mat Grade Gpo N-2 (Class 130) (S/S By Mil-I-24768/5)
MIL-P-24364/3 - Plastic Sheets, Laminated, Thermosetting, Electrical Insulating Sheet, Polyester Glass-Mat Grade Gpo N-3 (S/S By Mil-I-24768/6)
MIL-P-24468 - Polybutadine-Polyethylene Copolymer Sheets, Virgin And Borated
This specification covers virgin and borated polybutadiene - polyethylene copolymer sheet material, hereinafter referred to as PPC sheet.
MIL-P-25374 - Plastic Sheet, Acrylic, Modified, Laminated
This specification covers the requirements for laminated, modified acrylic sheet.
MIL-P-25395 - Plastic Material, Heat Resistant, Low Pressure Laminated Glass Fiber Base, Polyester Resin
MIL-P-25515 - Plastic Materials, Phenolic Resin, Glass-Fiber Base, Laminated
This specification covers the requirements for fiberglass reinforced phenotic resin laminate sheets and parts, for use in structural and other applications.
MIL-P-25518 - Plastic Materials, Silicone Resin, Glass Fiber Base, Low Pressure Laminated
This specification covers glass fiber base, silicone resin, low pressure laminated plastic material used for airframe structural parts (including external parts) and other applications.
MIL-P-25770 - Plastic Materials, Asbestos Base, Phenolic Resin, Low Or High Pressure Laminates
MIL-P-26692 - Plastic Tube And Tubing, Polyethlene
MIL-P-28579 - Plastic Compound, Epoxy-Polyamide, Marine Splash Zone Application
MIL-P-29609 - Polyimide Retainer Material, Porous Non-Metallic
This specification covers basic characteristics required for porous polyimide materials intended for use as instrument and thin section ball bearing retainers (cages), and methods of determining these characteristics.
MIL-P-3086 - Plastic-Material, Thermoplastic, Non-Rigid, Polyamide Resin
MIL-P-3114 - Plastic&Material, Laminated, Thermosetting, Sheets, Cotton&Fabric Base, Phenolic&Resin (S/S By Mil-P-15035)
MIL-P-3115 - Plastic Sheet, Laminated, Thermosetting, Paper-Base, Phenolic-Resin (Use L-P-513)
MIL-P-3408 - Plastic-Material, Molding, Rigid Thermoplastic, Aniline Formaldehyde, For Use In Electronic, Communications, And Allied Electrical Equipment
MIL-P-3409 - Plastic-Material, Molding Rigid Thermoplastic, Polydichlorostyrene; For Use In Electronic, Communications, And Allied Electrical Equipment
This specification covers the requirements for polydichlorostyrene molding compounds for use in electronic, communications, and allied electrical equipment.
MIL-P-3410 - Plastic-Material, Molding, Rigid Thermoplastic, Poyvinyl Chloride And Copolymers Thereof, For Use In Electronic, Communications, And Allied Electrical Equipment (Use Fed Spec L-M-530)
MIL-P-3411 - Plastic-Material Molding, Rigid Thermoplastic, Vinylidene Chloride, For Use In Electronic, Communications, And Allied Electrical Equipment (Use L-P-1041)
MIL-P-3413 - Plastic-Material, Molding, Rigid Thermoplastic, Polystyrene, For Use In Electronic, Communications, And Allied Electrical Equipment.
MIL-P-3414 - Plastic-Material, Molding; Rigid Thermoplastic, Cellulose Acetate Butyrate; For Use In Electronic, Communications, And Allied Electrical Equipment (S/S By L-P-349)
MIL-P-3415 - Plastic-Material, Molding, Rigid Thermoplastic, Cellulose Acetate, For Use In Electronic, Communications, And Allied Electrical Equipment.
MIL-P-3416 - Plastic-Material, Molding, Rigid Thermoplastic, Acrylic, For Use In Electronic, Communications, And Allied Electrical Equipment.
MIL-P-3584 - Plastic Sheet, Polyvinyl Chloride, Plasticized, Elastomeric
This specification covers a thermoplastic elastomeric compound of the plasticized polyvinyl chloride resin type furnished in the form of sheets.
MIL-P-3796 - Plastics, Polystyrene, Glass Filled Molding Material And Molding Parts (S/S By Mil-M-22123)
MIL-P-3803 - Plastic, Polyethylene, Molded And Extruded Shapes, Sheets And Tubing
MIL-P-3827 - Plastics, Polystyrene, Modified( Molding Material And Molded Parts
MIL-P-38477 - Plastic Material, Pressure Sensitive Adhesive, For Aerospace Identification And Marking (S/S By A-A-59485)
MIL-P-3999 - Plastic, Plastisol, Fabricated Parts
MIL-P-40619 - Plastic Material, Cellular, Polystyrene (For Buoyancy Applications)
MIL-P-43018 - Plastic Sheet, Polyethylene Terephthalate, Drafting, Coated Or Abraded
MIL-P-43037 - Plastic Rods Laminated Thermosetting Nylon Fabric Base Phenolic Resin
MIL-P-43038 - Plastic Molding Material, Polyester, Low-Pressure Laminating, High Temperature Resistant
This specification covers one type of polyester resin suitable for low pressure molding of strong-glass-laminated structures for use at high temperatures.
MIL-P-43043 - Plastic Molding Material, Pre-Mix, Polyester, Glass Fiber Reinforced
This specification covers one type of glass fiber reinforced polyester pre-mix molding compound suitable for low pressure molding.
MIL-P-43045 - Plastic Potting And Impregnating Material, Polybutene
MIL-P-43050 - Plastic, Epoxy, Modified, For Potting Polyiron
MIL-P-43081 - Plastic Molding Material (Potting And Impregnating), Polyethylene, Low Molecular Weight
MIL-P-43090 - Plastic Molding Material, Asphalt, Asbestos Filled
MIL-P-43127 - Plastic Pre&Impregnated Glass Mat Polyester Resin
MIL-P-43398 - Plastic, Laminating, Epoxy Base
MIL-P-43604 - Plastic Tubing (Flexible, Polyurethane Film)
MIL-P-44305 - Plastic, Film, Flexible, Polyamide And Polyethylene
This document is for one type of flexible, polyamide and polyethylene plastic film. It is to be used for making an identification pocket, window and lamination layer for the chemical protective patient wrap (see 6.1).
MIL-P-46036 - Plastic Sheet, Rods, Tubes And Discs, Polychlorotrifluoroethylene
MIL-P-46040 - Plastic Sheet, Phenolic, Glass Fabric Reinforced, Heat Resistant (S/S By Mil-P-25515)
MIL-P-46060 - Plastic, Polyamide (Nylon), Rigid( Rods, Tubes And Flats )Superseded By L-P-410A(
MIL-P-46067 - Plastic Embedding Compound, Epoxy Resin System
This specification covers epoxy resins used as embedding compounds.
MIL-P-46071 - Plastic, Cellular Polyurethane, Foamed In Place, Rigid (4 Pounds Per Cubic Foot)(Use Mil-P-21929)
MIL-P-46074 - Plastic Molding Material, Cellulose Propionate (See Notice 1 For Replacement Information)
MIL-P-46076 - Plastic Polyurethane, Flexible Potting And Molding Compound
MIL-P-46088 - Plastic Molding And Extrusion Material, Phenoxy
MIL-P-46094 - Plastic Filler Compound, Epoxy, For Honeycomb Panels
MIL-P-46097 - Plastic Film, Polyvinyl Fluoride (Use L-P-1040)
MIL-P-46109 - Plastic Molding Material, Polypropylene, Glass Fiber Reinforced (S/S By Astm-D4101)
MIL-P-46111 - Plastic Foam, Polyurethane (For Use In Aircraft)
MIL-P-46112 - Plastic Sheet And Strip, Polyimide (S/S By Astm-D5213)
MIL-P-46115 - Plastic Molding And Extrusion Material, Polyphenylene Oxide
MIL-P-46120 - Plastic Molding And Extrusion Material, Polysulfone
This specification covers polysulfone thermoplastic materials.
MIL-P-46121 - Plastic Sheet And Coating Material, Para-Xylylene Polymers
MIL-P-46122 - Plastic Molding Material And Plastic Extrusion Material, Polyvinylidene Fluoride Polymer And Copolymer
MIL-P-46124 - Plastic Molding And Extrusion Material, Ionomer Resins
MIL-P-46129 - Plastic Molding And Extrusion Material, Polyphenylene Oxide, Modified
MIL-P-46131 - Plastic Molding And Extrusion Material, Polyphenylene Oxide, Modified, Glass Fiber Reinforced
MIL-P-46133 - Plastic Molding And Extrusion Material, Poly(Aryl Sulfone Ether) Resin, Thermoplastic
MIL-P-46137 - Plastic Molding & Extrusion Material, Acetal, Glass Fiber Reinforced (S/S By Astm D4181)
This specification covers the requirements of several glass fiber reinforced acetal homopolymer and copolymer compounds suitable for molding and extrusion.
MIL-P-46140 - Plastic Sheet (Sheeting), Pressure Sensitive Adhesive Coated, Cellulose Acetate, Transparent (S/S By A-A-59504)
MIL-P-46144 - Plastic Sheet, Polycarbonate (S/S By A-A-59502)
MIL-P-46160 - Plastic Molding Materials, Polytherphthalate, Thermoplastic (See Notice 1 For Replacement Information)
MIL-P-46161 - Plastic Molding Material, Polyterephthalate Thermoplastic, Glass Fiber Reinforced
MIL-P-46161 - Plastic Molding Material, Polyterephthalate Thermoplastic, Glass Fiber Reinforced
MIL-P-46169 - Plastic, Sheet Molding Compound, Polyester, Glass Fiber Reinforced (For General Purpose Applications)
MIL-P-46174 - Plastic Molding Material, Polyphenylene Sulfide, Glass Fiber Reinforced (See Cancellation For Replacement Information)
MIL-P-46179 - Plastic Molding And Extrusion Material, Polyamide Imide (Pai) (S/S By Astm-D5204)
This specification covers polyamide-imide (PAI) thermoplastic materials intended for use up to 260 degrees C (500 degrees F).
MIL-P-46180 - Plastic Molding Material, Polyamide (Nylon), Glass Fiber Reinforced (S/S By Astm-D4066)
MIL-P-46181 - Plastic Molding Material, Polyamide (Supertough Nylon (S/S By Astm-D4066)
MIL-P-46183 - Plastic Molding And Extrusion Material, Polyetheretherketone (Peek)
This specification covers polyetheretherketone (Peek) thermoplastic materials suitable for injection molding or extrusion (see 6.1).
MIL-P-46184 - Plastic Molding And Extrusion Material, Polyetherimide (Pei) (S/S By Astm-D5205)
MIL-P-46185 - Plastic Molding And Extrusion Materials, Polyethersulfone
This specification covers polyethersulfone (PES) thermoplastic materials suitable for injection molding or extrusion.
MIL-P-4640 - Plastic Film, Polyethylene, For Balloon Use
This specification covers polyethylene plastic film furnished as flat tubing, and suitable for balloon use.
MIL-P-46847 - Plastic Material, Foamed Polyurethane For Encapsulating Electronic Components
MIL-P-46892 - Plastic Molding Material Epoxy, Glass Fiber
MIL-P-47082 - Plastic, Ether Polyurethane, For Extrusion And Molding
MIL-P-47134 - Plastic, Compression Molding Compounds
MIL-P-47135 - Plastic Laminates, Glass Fabric Base Epoxy Resin, Structural Shapes
MIL-P-47136 - Polyvinyl Chloride, Plasticized
MIL-P-47253 - Polytetrafluoroethylene (Ptfe), Ceramic Fiber Reinforced
MIL-P-47259 - Phenolic Spheres
MIL-P-48296 - Polytetrafluoroethylene (Ptfe)
This specification covers one type of polytetrafluoroethylene for use in pyrotechnics (see 6.4).
MIL-P-50266 - Polyethylene (For Use In Ammunition Containers) (S/S By Mil-F-50449)
MIL-P-51402 - Plastic Sheet: Polypropylene-Polyethylene Laminate Film
MIL-P-51403 - Plastic Sheet, Vinyl, Flexible
MIL-P-51406 - Plastic Sheets, Vinyl Chloride Polymer And Copolymer, Flexible
This specification covers transparent, flexible sheets, made of vinyl chloride polymer or copolymer resins.
MIL-P-51431 - Plastic Molding And Extrusion Material, Polyethylene Copolymer, High Density
This specification covers two types of high density polyethylene copolymer used for extrusion and molding processes.
MIL-P-51432 - Plastic Sheet, Polyethylene Copolymer
MIL-P-51433 - Plastic Tube, Polyethylene Copolymer
This specification covers two types of high density plastic tube made of polyethylene copolymer.
MIL-P-51514 - Plastic Sheets, Polyether Urethane, Flexible
MIL-P-5431 - Plastic, Phenolic, Graphited Sheets, Rods, Tubes And Shapes
This specification establishes the requirements for a laminated phenolic graphited material.
MIL-P-55010 - Plastic Sheet, Polyethylene Terephthalate (S/S By A-A-56021)
MIL-P-55011 - Plastic Sheet, Polyethylene Terephthalate, Translucent Scribe-Coated
MIL-P-55024 - Parts, Molded Plastic Fabricated, Diallyl Phthalate
MIL-P-55028 - Molding Plastic, Polychlorotriflouroethylene (Kel-F) (Use L-P-385)
MIL-P-55072 - Plastic Sheets, Phenolic Resin, Laminated, Thermosetting, Cotton-Fabric-Base (For Missile Application) (Use Mil-P-15035)
MIL-P-5952 - Plastic Areas, Transparent, Aircraft, General Inspection Of
MIL-P-6264 - Plastic Sheet And Film, Vinyl Copolymers
MIL-P-63462 - Plastic Molding And Extrusion Material, Ethyl Cellulose, For Rocket Grain Inhibiting Materials
MIL-P-77 - Plastic Sheet And Plastic Rod, Thermosetting, Cast (Use L-P-516)
MIL-P-78 - Plastic-Material, Laminated, Thermosetting (For Designation Plates) (Use L-P-387)
MIL-P-79 - Plastic Rods And Tubes, Thermosetting; Laminated (S/S By Mil-I-24768/8, Mil-I-24768/10, Mil-I-24768/11, Mil-I-24768/12, Mil-I-24768/13, Mil-I-24768/14 & Mil-I-24768/16)
MIL-P-8059 - Plastic Material, Laminated, Thermosetting, Sheets And Tubes, Asbestos Base, Phenolic Resin (Use L-P-509)
MIL-P-81255 - Plastic Molding Material, Asbestos Phenolic
This specification covers two classes of asbestos phenolic molding material.
MIL-P-81390 - Plastic, Molding Material, Polycarbonate, Glass Fiber Reinforced
This specification covers three types of glass-fiber filled polycarbonate materials suitable for injection molding and extrusion.
MIL-P-82540 - Plastics Materials, Polyester Resin, Glass Fiber Base, Filament Wound Tube
This specification covers the requirements for glass fiber base, filament wound polyester resin plastic materials for use in fabrication of tubes.
MIL-P-8257 - Plastic Sheet, Thermosetting, Transparent
MIL-P-82650 - Plastic Molding Material, Glass Phenolic
This specification covers one type of glass phenolic plastic molding material.
MIL-P-83310 - Plastic Sheet, Polycarbonate, Transparent (S/S By Sae-Ams-P-83310)
MIL-P-83379 - Plastic Material, Cellular Polyurethane, Foam-In-Place, Rigid (3 Pounds Per Cubic Foot Density)
MIL-P-8587 - Plastic; Sheet, Colored, Instrument Flying Training
MIL-P-8655 - Plastic Material, Laminated, Thermosetting Sheets, Cotton-Fabric-Base, Post-Forming (Use L-P-511)
MIL-P-9071 - Plasticizer Content For Transparent Laminated Glazing Materials, Determination Of
MIL-PRF-23653 - Plastic Tiles, Vibration Damping
This specification covers four classes of flexible, water and fuel-resistant, fire-retardant plastic tiles for damping the flexural vibration of shipboard metal structures.
MIL-PRF-25690 - Plastic, Sheet And Formed Parts, Modified Acrylic Base, Monolithic, Crack Propagation Resistant
This specification covers the requirements for two classes of transparnet monolithic, modified, methyl methacrylate flat stretched sheets that may be formed into parts having superior crack propagation and craze resistance as a result of proper hot stretching (see 6.4.2).
MIL-PRF-5425 - Plastic, Sheet, Acrylic, Heat Resistant
This specification covers optical quality, transparent, heat-resistant, cast acrylic plastic sheet. The requirements are for flat sheet material that has not been formed.
MIL-PRF-87260 - Foam Material, Explosion Suppression, Inherently Electrostatically Conductive, For Aircraft Fuel Tanks
This document covers the requirements for an electrically conductive open-celled foam material that will be used for explosion suppression in aircraft fuel.
MIL-R-21607 - Resins, Polyester, Low Pressure Laminating, Fire-Retardant
This specification covers translucent resins used to fabricate fire-retardant glass reinforced plastic laminates for use in boats, tanks, and other Naval applications.
MIL-R-21931 - Resin, Epoxy
MIL-R-22628 - Resin, Casting, Epoxy, Aluminum Filled
This specification describes the requirements of the procurement of one type of aluminum-filled, epoxy, casting resin.
MIL-R-23444 - Resin, Polyvinyl Chloride, Plastisol Grade
MIL-R-23461 - Resin Compound, Thermosetting, Room Temperature Curing, For Metal Coating
This specification covers the requirements for unpigmented, thermosetting, room temperature curing resin with associate curing agents to be used for convolutely, or spirally wound fibrous glass reinforced coatings on steel, aluminum and gun metal for corrosion protection.
MIL-R-25042 - Resin, Polyester, High Temperature Resistant, Low Pressure Laminating
This specification covers the requirements for high temperature resistant, low-pressure laminating polyester resins used in fabricating glass fabric-based plastic laminates for various applications (see 6.1).
MIL-R-25506 - Resin Solution, Silicone, Low-Pressure Laminating
This specification covers the requirements for low-pressure laminating silicone resin used in the fabrication of glass fabric-based plastic laminates that conform to MIL-P-25518 (see 6.1 and 6.3).
MIL-R-46068 - Resin, Polyester, Bisphenol - A Type
MIL-R-46198 - Resin, Polyimide, Hot Pressed Or Pressed And Sintered (S/S By Astm-Ps93)
This material specification covers molded, unfilled or filled polyimide resin in the form of rod, bar, tube or slab, parts machined therefrom, and parts direct-formed from powder.
MIL-R-46896 - Resin, Powdered Epoxy
MIL-R-47025 - Resin, Casting, Fire Retardant, Epoxy Base
This specification covers one type of fire retardant casting resin consisting of an epoxy resin and an amine type curing agent.
MIL-R-47252 - Resin, Epoxy
MIL-R-47300 - Resin, Casting, Epoxy Base
MIL-R-83330 - Resin, Heat-Resistant, Laminating
This specification covers one type of resin used in fabricating reinforced plastic structural parts for aircraft, missiles, and other applications in which extreme heat resistance is essential.
MIL-R-9299 - Resin, Phenolic, Laminating
MIL-R-9300 - Resin, Epoxy, Low-Pressure Laminating
This specification covers the requirements for low-pressure laminating epoxy resins used in fabricating glass fabric-based plastic laminates for various applicaitons.
MIL-S-14195 - Styrene Monomer
This specification covers one grade of high purity styrene monomer.
MIL-S-24062 - Sprayable Vibration Damping Material For Light Steel Plate
MIL-S-24154 - Syntactic Buoyancy Material For High Hydrostatic Pressures
This specification covers requirements for rigid syntactic buoyancy materials used to provide buoyancy for deep ocean submerged research vehicles, and other related applications.
MIL-S-24167 - Syntactic Material, Rigid, Pour-In-Place, Structural Void Filling
This specification covers the requirements for a pour-in-place, rigid cellular resin system.
MIL-S-25392 - Sandwich Construction, Plastic Resin, Glass Fabric Base, Laminated Facings And Polyurethane Foamed-In-Place Core, For Aircraft Structural Applications
This specification covers plastic molded sandwich construction using glass fabric base plastic laminate facings and urethane foamed-in-place core material for aircraft structural and applications up to 350 degrees F, including all aircraft external plastic parts, and other weapons applications.
MIL-S-28600 - Sorbents, Floating (For Oil Spill Removal) (S/S By A-A-1280, A-A-1281, And A-A-1282)
MIL-S-46863 - Surface Coating, Electrically Conductive
MIL-S-62502 - Sheet Molding Compound; Low Shrinkage (S/S By A-A-52446)
MIL-S-83474 - Shims, Molded, Filled Resin Compound And Sheet Prepreg (S/S By Sae-Ams-S-83474)
This specification covers the requirements for filled, resinous, thermosetting compound and sheet prepreg to fabricate shims for use during assembly of aircraft components and parts.
MIL-STD-1944 - Polymer Matrix Composites
This standard prescribes technical requirements and quality assurance provisions which are used for the specification of polymer matrix composite materials.
MIL-STD-2190 - Non-Metallic Seal Materials
This standard covers the requirements for ensuring mechanical, physical and chemical properties, including storage requirements, service temperature limits, detrimental material controls and test methods, for non-metallic materials.
MIL-STD-2199 - Coverings For Waterborne Main Propulsion Shafting On U.S. Naval Surface Ships And Submarines
This standard covers standard practices for the application of a four-layer shaft covering system on the body areas of waterborne main propulsion shafting. Material and application requirements are also provided for coatings that are to be applied to waterborne shaft flange assemblies.
MIL-STD-672 - Dimensional Tolerances Of Molded Plastic Items
MIL-STD-860 - Fokker Ultrasonic Adhesive Bond Test
MIL-T-10652 - Tubing, Plastic Glass Fabric Base, Low Pressure Laminated
This specification covers one type of laminated glass fabric base tubing, low pressure molded used in construction of antenna masts (see 6.1).
MIL-T-47030 - Tape, Phenolic, Hi-Silica
MIL-T-47031 - Tape, Asbestos Phenolic, Preimpregnated
MIL-T-47286 - Tape, Plastic, Programming Data
MIL-T-47287 - Tube, Spiral Wrap, Polytetrafluoroethylene And Polyamide (S/S By A-A-59602)
This specification establishes the requirements for spirally wrapped polytetraflouroethylene and polyamide tubing.
MIL-T-81141 - Tape, Asbestos Felt Impregnated With Phenolic Resin (Use Mil-T-60330)
MIL-W-10434 - Window, Observation (See Mil-B-22191)
MIL-W-80 - Window, Observation, Acrylic Base, Antielectrostatic, Transparent (For Indicating Instrument)
This specification covers one type of transparent heat resistant arcylic resinbased sheet material, which is antielectrostatic.
QPL-14591-2 - Plastic Film, Non Rigid Transparent
QPL-14-80 - Molding Compounds, Thermosetting
QPL-15035-23 - Plastic-Material, Laminated, Thermosetting, Sheets, Cotton-Fabric-Base, Phenolic-Resin
QPL-15047-16 - Plastic-Material, Laminated, Thermosetting, Sheets, Nylon Fabric Base, Phenolic Resin
QPL-17721-7 - Plastic Sheet, Laminated, Thermosetting, Glass Mat, Melamine Resin
QPL-18177-105 - Plastic Sheet, Laminated, Thermosetting, Glass Fiber Base, Epoxy-Resin
QPL-18324-39 - Plastic Material, Laminated Phenolic, For Bearings (Water Or Grease Lubrication) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-18345-1 - Core Material, Cellular Cellulose Acetate
QPL-19119-29 - Pipe, Plastic, Rigid Unplasticized High Impact Polyvinylchloride
QPL-19161-23 - Plastic Sheet, Laminated, Glass Cloth Polytetrafluoroethylene Resin
QPL-19468-40 - Plastic Rods, Polytetrafluoroethylene, Molded And Extruded
QPL-19833-35 - Molding Plastic And Molded Plastic Parts, Glass Fiber Filled, Diallyl Phthalate Resin (See Notice 1 For Replacement Information)
QPL-20689 - Plastic, Plastisol. Molding, Extruding, Coating And Dipping Compound
QPL-21556-4 - Molding Plastic And Molded Plastic Parts, Asbestos-Fiber Filled, Arc- And Flame-Resistant Phenolic Resin (See Notice 1 For Replacement Information)
QPL-21607-29 - Resins, Polyester, Low Pressure Laminating, Fire-Retardant (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-22324-26 - Plastic Sheet, Laminated, Thermosetting, Paper-Base, Epoxy-Resin
QPL-22735-4 - Film, Elastomeric, Fluorescent, For Weapons Systems
QPL-23653-31 - Plastic Tiles, Vibration Damping (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24062-11 - Sprayable Vibration Damping Material For Surface Vessels
QPL-24154-10 - Syntactic Buoyancy Material For High Hydrostatic Pressures
QPL-24249-5 - Plastic Material, Cellular Polyurethane, Rigid, Void Filler, Foam-In-Place, Large Scale And Installation Of (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24325-12 - Molding Material, Plastic, Epoxy Compounds Thermosetting
QPL-25042-2 - Resin, Polyester, High Temperature Resistand, Low Pressure Laminating
QPL-25374-5 - Plastic Sheet, Acrylic, Modified, Laminated
QPL-25690-15 - Plastic, Sheets And Formed Parts, Modified Acrylic Base, Monolithic, Crack Propagation Resistant (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-3115-47 - Plastic Sheet, Laminated, Thermosetting, Paper-Base, Phenolic-Resin
QPL-4640-5 - Plastic Film, Polyethylene, For Balloon Use
QPL-5425-21 - Plastic Sheet, Acrylic, Heat Resistant (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-7575-11 - Resin, Polyester, Low Pressure Laminating
QPL-8087-2 - Core Material, Foamed-In-Place, Polyester-Diisocyanate Type, For Aircraft Structural Applications
QPL-8184-19 - Plastic Sheet, Acrylic, Modified (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8257-2 - Plastic, Sheet, Thermosetting, Transparent
QPL-83054-7 - Baffle And Inerting Material, Aircraft Fuel Tank (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8799-4 - Film, Elastomeric, Pigmented, For Use In The Manufacture Of Aircraft Decalcomanias
QPL-9299-12 - Resin, Phenolic, Low-Pressure Laminating
QPL-9300-13 - Resin, Epoxy, Low-Pressure Laminating
QPL-L-M-500-6 - Molding Plastic, Methacrylate
QPL-L-P-349-3 - Plastic Compounds, Molding, Cellulose Acetate Butyrate, And Molded Or Extruded Parts
QPL-L-P-391 - Plastic, Methacrylate Sheets, Rods, And Tubes - Cast
QPL-L-P-510 - Plastic Sheet, Modified Unplasticized Polyvinylchloride, Rigid
QPL-L-P-590-14 - Plastic Compounds, Molding And Extrusion, Polyethylene
UL746 - Polymeric Materials - Short Term Property Evaluations
These requirements cover short-term test procedures to be used for the evaluation of materials used for parts intended for specific applications in electrical end products.
UL746 - Polymeric Materials - Long Term Propery Evaluations
These requirements cover long-term test procedures to be used for the evaluation of materials used for parts intended for specific applications in end products.
UL746 - Polymeric Materials - Use In Electrical Equipment Evaluations
These requirements cover parts made of polymeric materials that are used in electrical equipment and describe the various test procedures and their use in the testing of such parts and equipment.
UL746 - Polymeric Materials - Fabricated Parts
These requirements cover a program applicable to parts that have been molded or facricated from polymeric material and describe the material-identity control system intended to provide trace-ability of the material used for the polymeric parts through the handling, molding or fabrication, and shipping operations.
UL746 - Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fiber, & Materials Used In Printed Wiring Boards
These requirements cover test procedures to be used for the evaluation of industrial laminates, filament wound tubing, vulcanized fibre, and materials for use in fabricating printed wiring boards.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business