MIL-DTL-25421C
4.4.3.1 Substitute sample sheets. If the items in the procurement lot are
impractical for providing test specimens, the substitute sample shall be one laminate
sheet, 0.125 ± 0.010 inch thick, with a linear measurement of at least 12 inches in
any dimension, and a minimum area of four square feet. For the Class 3 electrical
test, the unit shall also include a 4 inch by 8 inch laminate sheet with a minimum
thickness of 0.75 inch, unless otherwise specified (6.2). When required, the sample
sheets shall be cut into specimens of the proper number and description for test as
provided in 4.4.3.
4.4.4 Examination of preparation for delivery. An examination shall be made in
accordance with Table VII to determine that packaging, packing, and markings
comply with the requirements of Section 5 of this specification. The sample unit for
this examination and also the unit to determine lot size for sampling shall be one
shipping container, fully packed, selected just prior to the closing operation. Shipping
containers full prepared for delivery shall be examined for closure defects. The
inspection level for this examination shall be S-2 and the Acceptable Quality Level
(AQL) shall be 2.5 defects per 100 units.
TABLE VII. Examination of Preparation for Delivery
Characteristic
Defect
Packaging
Not level specified in requirements. Not individually
wrapped or interleaved, when specified. Packaging
material not as specified.
Packing
Not level specified in contract requirements.
Arrangement not as specified. Specified pads or liners
missing or not as specified. Any nonconforming
packing component, component missing, damaged or
otherwise defective affecting serviceability. Closure not
as specified.
Count
Less than specified or indicated quantity.
Weight
Gross weight exceeds specified requirements.
Markings
Interior or exterior markings (as applicable) omitted,
illegible, incorrect, incomplete, or not in accordance
with requirements.
4.5 Test conditions.
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business